DC to DC step up module based on the upgraded XL-Semi XL-6019, offering up to 5A switching current and conversion efficiency of up to 97%.<\/span><\/p>\n This XL6019 has two input pins for VCC and GND on the left side of the module. It has two output pins on the right side of the module. To get the desired output voltage you have to rotate the trimpot screw. It changes the feedback resistance value and thus the output voltage with respect to the input voltage. As this module is a step-up converter, therefore, the output current is always smaller than the input current. If the output power is greater than 10W then add the heat sink with the module otherwise it may damage the module.\u00a0<\/p>\n Also check\u00a0the . It is a non-isolated BUCK module with synchronous rectification. The module features an integrally molded power inductor and a synchronous rectifier control chip. It includes built-in 160\u00b0C thermal shutdown for safety and boasts low output ripple of 30mV (no-load).<\/span><\/p>\nFeatures<\/span><\/h2>\n
\n
Package Includes:<\/span><\/h2>\n
\n
Specifications:<\/span><\/h2>\n
\n\n
\n \u00a0Output ripple<\/td>\n 100mv (MAX)<\/td>\n<\/tr>\n \n \u00a0Working Temperature<\/td>\n Industrial (-40 C to + 85 C)<\/td>\n<\/tr>\n \n Voltage regulation<\/td>\n 0.5% MS + -> Positive; IN > Negative; OUT + -> Positive; OUT ><\/td>\n<\/tr>\n \n Negative Output Voltage<\/td>\n DC 5-40V (Adjustable)<\/td>\n<\/tr>\n \n \u00a0Input Current<\/td>\n 5A (MAX)<\/td>\n<\/tr>\n \n \u00a0Input Voltage<\/td>\n DC 3-35 V Switching<\/td>\n<\/tr>\n \n \u00a0Frequency<\/td>\n 220 kHZ<\/td>\n<\/tr>\n \n \u00a0Boost Module Size<\/td>\n Approx 50 x 28 x 13mm (L x W x H)<\/td>\n<\/tr>\n \n \u00a0Load regulation<\/td>\n 0.50%<\/td>\n<\/tr>\n \n \u00a0Conversion efficiency<\/td>\n 94% (MAX)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n